PLEASE MAKE SURE YOU READ THE INSTRUCTIONS & INFORMATION ON HOW TO OPERATE AND TAKE CARE OF YOUR WATCH BEFORE YOU HANDLE THEM. IT WILL DEFINITELY LET YOU ENJOY A BETTER EXPERIENCE WITH YOUR WATCH.

WATER RESISTANCE/ WATER PROOF

Please note that although certain watches are water-resistant to a certain degree, Perfect Clones will suggest that you try to keep it away from water whenever possible and always make sure that the watch crown is screwed in tight to avoid water or moisture entering it. All watches have been checked to be in working condition before we send them out.

Please do not wear your watch when you go swimming or even when taking a shower. This is to prevent accidental moisture or water seeping in. We at Perfect Clones cannot guarantee the watch if your accidental usage results in water or moisture getting into the watch.

Q1. WHAT IS THE FIRST THING I NEED TO DO UPON RECEIVING THE WATCH?

A1. Upon receiving the watch, please wind it. It is likely that the watch runs out of energy during the journey. Wind the watch by turning the crown for about 15 - 20 full turns clockwise. If you know your watch is battery, there is no need to wind it. If your watch has a screw-tight crown, release it by turning it anti-clockwise until it is loose. Then you can wind it for 15 – 20 times clockwise as mentioned. Once it is done, you can screw it tight by pushing the crown inside. Turn the crown clockwise and screw it tight back at the same time. By doing a manual winding of the watch, your watch will start to tick.

Q2. MY WATCH IS AUTOMATIC, WHY DOES IT STOP?

A2. If your watch is a quartz version, it means that the battery has been used up. Please change the battery.

If it is an automatic watch, it is running on stored energy. It gains energy from human hand kinetic movement. When you do not wear it and it runs out of stored energy, it will stop. To make it tick again, you have to wind it for 10 - 12 rounds by turning the crown clockwise. To re-adjust the Day or Date back correctly, it depends on whether the crown is the one adjusting or it is recessed or button pusher. You can then adjust accordingly. For the crown, pull it out lightly once to adjust Date/Day (Most watches are like that). If you pull out the crown out twice, it will adjust Time. If it is a screw in crown, unscrew the crown anti-clockwise and follow the same instructions to adjust Date/Day and Time.

Q3. HOW DO I SET THE TIME?

A3. To set time, you need to unscrew crown anti-clockwise direction if you have a screw-in crown watch. You need to softly and slowly pull the crown out a little bit. The best way to do this is to use first and second finger and use finger knuckle as a lever in order to pull the crown out with as little force as possible. You can feel a little "click"! Now you can set the time by turning it anti-clockwise. This would turn the minute-hour hands forward until you set the right time. When time is set, push the button back and screw the crown clockwise for a few rounds to ensure it is screwed back tight.

Q4. HOW DO I SET THE GMT & LOCAL TIME?

A4. GMT means Dual Time Zone and it usually use a 24-hour clock instead of a 12-hour clock we normally use. GMT can be set with two time zones. A local minute-hour hand time and a GMT (sometimes red) arrow second time zone.

To adjust time, please follow the instructions below:

1. Unwind the crown anti-clockwise softly and slowly until it loosen up. There are two steps of pulling out the button stem. Do not exert too much force here and please make sure you do it lightly and carefully.

2. STEP ONE is for setting the GMT second time zone. STEP TWO is for setting the local time. Pull one-step out is to set GMT and date by winding the button clockwise and anticlockwise respectively. Pull one more step is for setting local time. Pushing the crown inward one step will bring it back to GMT setting. Pushing it two steps will bring it back to normal position and you can wind it back clockwise while pushing it back softly to secure the crown onto the watchcase.

3. Set local time FIRST and then GMT SECOND time zone. When you set local time, GMT time will also be changed at the same time

Q5. I HAVE A QUARTZ VERSION (BATTERY OPERATED) WATCH, WHEN DO I NEED TO CHANGE THE BATTERY?

A5. A new battery will normally last for two years. Depending on time of the last replacement, you would probably need to change battery within two years.

Q6. I HAVE A WATCH WITH DATE, HOW DO I CHANGE THE DATE?

A6. To change date and time you need to do the following. If you have a screw-in crown like a Rolex, you need to turn the crown anti-clockwise for a few rounds until the crown is loose. Then you need to pull the crown out softly by using your thumb’s nail and first finger’s nail. Please do this softly to avoid breaking the stem. You should feel a "click" here. There are two steps when you pull the crown out. The first step is for setting the date (and Day if you have a Rolex Day-Date). The second step is for setting the local time (see Q2 and A2 for details). You can only set Date forward by turning the crown in one direction. When you are done with setting date and time, push back the crown and wind it clockwise for a few times to lock it.

Q7. WHAT IS SCREW-IN CROWN? HOW IS THIS DIFFERENT FROM OTHERS?

A7. A Screw-in crown will lock into the case of the watch when you turn the crown clockwise toward the watch case. It will tighten when it is screwed tight. Most Rolex watches use Screw-in crown. When you want to wind your watch, you have to un-lock the crown by turning the button anti-clockwise until you see the crown comes out of the watch a little bit, about 1.0 to 1.5 mm. Do not force the crown to come out cause it will easily break the stem link with the watch. When the crown comes out, you can then wind it, adjust time, date, day just like other watches. To lock it, slowly turn it and push it toward the watch until it is locked tight. NO need to apply extra force after it is tight! For most other non screw-in crown watches, you just wind it, adjust time, date, day without the need to un-screw the crown.

Q8. WHAT IS A RECESSED PUSHER? HOW IS IT DIFFERENT FROM THE PUSHER BUTTONS THAT ARE NOT RECESSED?

A8. Recessed pushers are button that are designed in a way that the button is inside the watch body, mostly for appearance purpose. Many times, there are too many push buttons on the watch already and making recessed pushers will help to save space and makes it more desirable in looks. Usually, recessed pushers are for setting date, year or day, etc. Use a ball-point pen to push the recessed pusher all-the-way and release fully will make it change accordingly. Repeat the process until you set the right information. Do not push half way or release half way, it will sometimes cause the gear to change half way and make it show the wrong information and it might damage other mechanical parts in the watch’s movement. 

Q9. I HAVE A ROLEX DAYTONA WITH VALJOUX 7750B1 MOVEMENT WITH FUNCTIONAL CHRONOS, HOW DO I USE THE STOPWATCH FUNCTION?

A9. The Daytona has chronograph buttons, which has a protective-screw lock for protection. This is a unique feature for Rolex Daytona. When you need to push the button, you need to un-wind the protective-screw to the level of the inside button, then you can push the button and press the button. Be sure to push it all the way and fully release it when pushing. Pushing halfway may cause it to stop half way and cause mechanical problems.

Q10. WHAT IS A TACHYMETER AND HOW DOES IT WORK?

A10. It is a scale on the dial. In fact, many sports version watches have it either on the rim or bezel. In conjunction with the second hand, it gives the speed of a moving object. A tachymeter takes a value determined in less than a minute and converts it into miles per hour. For example, a wearer could measure the time it takes a car to pass between mile markers on the highway. When the car passes the second marker, the second hand will be pointing to the cars speed in miles per hour on the tachymetric scale.

Q11. HOW DO I USE THE STOPWATCH FUNCTION ON VALJOUX 7750B1 MOVEMENT TO AVOID DAMAGE TO IT?

A11. To avoid damaging the delicate mechanisms of the Valjoux 7750b1 movement you need to follow the instructions listed below to take care of it:

If your Valjoux 7750b1 has DATE function, DO NOT ADJUST the date when your time is between 10:00 to 3:00. It will damage the internal gears unknowingly if you do that. The BEST WAY is to manually adjust the time to 6:00 and then adjust the DATE after that.

If you are using the chronograph functions of the Valjoux 7750b1, always make sure that to start the stopwatch, you depress the pusher button on top and also to STOP the stopwatch, depress the same pusher button.

REMEMBER: START & STOP is TOP Pusher Button

ONLY after you STOP the stopwatch, then you depress the lower pusher button to RESET the stopwatch function. DO NOT DEPRESS the lower pusher button when the stopwatch function is running. ONLY Depress the lower pusher button after you STOP the chronograph.

If you follow the instructions carefully, your watch will last you a long time. Naturally watches may not last a lifetime since they aren’t made to COSC standards and neither are they SWISS GENEVE made or stamped. Remember a replica is always a replica but do enjoy them as at a fraction of the cost, these cosmetically perfect replicas are a joy to wear, aren’t they?

If you have other enquiries, please kindly email me at likemarket@gmail.com

Some additional 7750/7750b1/7753 Valjoux Movement Information

*Please read them before u play with your watch that has above movement

1. How do you set date on 7750 or 7753 or 7750b1 or any movt with date chrono/ automatic?

Do not activate the chrono until you have done all these steps as mentioned

When you receive your piece, please remember to handwind the piece for about maybe 50 rounds, so to generate enough power reserve. Then you shake the piece like a "mad cow" for 3-4 minutes to generate more power reserve (If necessary)

Then pull the crown out to adjust the hour hand manually to determine when is am/pm. See the date change - then you will know when is am/ pm. Make sure you know when is am/ pm before you proceed

Make sure you do not adjust the date between 10pm-3am ever!!! Do not ask me why because it just works this way. if you adjust between 10pm-3am, the date will jam or go half way.

After u have confirmed the am/ pm…..u can adjust the crown to get to the desired date you want.

As for the timer hand to reset back to zero, it is pure luck….u may have perfect reset, or less than perfect reset. My Genuine Rolex Daytona did not reset back to zero after 3 months. By the way, make sure everytime you activate chrono, you have enough power reserve. Have fun!!!

Important thing!! 

Q1: Since the goods will deliver in promply, how long will I receive my goods?

A1: Generally, after your order and payment done please send to the mail to confirm you adress is correct. And then we will send you tracking number in three days (not including Saturday and Sunday). And in the further 10 to 14 days you will receive your goods. (Of course we will send to you as soon as we could. But please make sure your adress and your name, surname is correct to avoide your goods getting lose, thank you.)

Q2: How about your quality?

A2: For Swiss watches, made 1:1. Almost 99.9% similar to original one. The movement and details are high class. The frequency of faults are close to ZERO. Only for mark might have a little different, but it won't effect the original function. For Asia watches, it will be more unstable. Because it's much cheap than Swiss and after each batch been sold out, the next batch probably has another version but it still not effect the original function. For Asia's movement, the frequency of faults will much higher than Swiss. The apparel is 70~80% similar to the original one.

Q3: May I reject or replacement for goods?

A3: Yes, you may. But it still depends on the situation. We accept it without man-made stituation. Each goods will be test till to perfect before we send it to our customer. Also it still might has some damages on the way of transit. What if you have this kind of problem please try to contact with us and get it to the nearby wachmaker's shop and check. We will try to help you.

Q4: Do you accept cash on delivery (COD)?

A4: Sorry, we do accept it so far.

Q5: If I do not completed the payment, may I pay it again?

A5: Yes, of course you may. Please order it again.

Q6: How to contact with us?

     A:   Email: likemarket@gmail.com    (all day)

     B:   MSN : likemarket@hotmail.com

     C:     Service online

Q7: Do the bags are authentic and with cards, dustbag, etc.?

A7: Except the "FIBER", every bag is high class fake. Of course they are 100% similar as the real one. Please never worry about the other items.

Q8: Do you pay import duties on your price?

A8: No tax, no risk of customs. After payment done, your package will arive next to your door in 7-10 days. My guarantee and experience.

Q9: Why I order Asia watches was not produce?

A9: Well, becasue some of our watches eliminate so quick. Therefore, you might see many of our watches renew everyday. If the products that we don't have yet we will inform you. Not unless you can take the similar pattern, such as the same dial but different color, something like this.

Q10.  About wrist watch rank and type, please contact https://www.likereplica.com/faq.php

P.S: Has about the Swiss watches with the Asian watches, we will suggest that you will purchase the Swiss watches. The reason lies in the Swiss watches to be quite stable, and the quality is also good. Compares is quite unstable in the Asian watches will have problems frequently. If you purchase the wristwatch are only must watch, but is not to wear, suggested that you may purchase the Asian watches.
But, if you hoped that may preserve perhaps wear. Suggested that you purchase the Swiss watches. Our Swiss watches is imports from Switzerland, therefore the price is also quite expensive, but we may guarantee that you will compare like the Swiss watches.

  Asia watches V.S. Swiss watches

Q11. About shipping, please contact "http://www.likereplica.com/information.php?cID=9

Q12: How many ways I can pay for my orders?

A12: About payment orders, please contact http://www.likereplica.com/information.php?cID=10&osCsid=7n5qna5hesibr1qe6h50q85186

Q13: May I become the wholesaler of watch?

A13: Yes, you may. We invite anyone who is interest about it please contact with us. Basically, as a wholesaler, we hope you can order over than ten watches. The same pattern or different pattern will also decide the different price. And we do not pay the found of delivery. If you still have any problem about details, please contact with us.

Q14: After payment done, I want to check out my tracking number. How long can I know the status of my goods?

A14: You can check out the status of your goods after three work days later (not including holidays).

Q15: What can I do after pay you money with credit card but still no any information about my good?

A15: And then please provide us your Card Number and the name of Card Owner to let bank could check with it.

PS. If you are use 3D card to confirm the goods, please log in to check out the goods or contact us. And if you double pay or want to refund, we will deduct 4% of money from it. Thank you so much.

Q16: I had tracking number but still can't find any information from express companies, what happened?

A16: Please never worry about it. When you had the tracking number you still need to wait for three~four days. After these days you can check it again. If you still have problem, please e-mail us to help you.

Q17: Why I payment by 3D card without confirmation?

A17: Only payment by credit card (Master and VISA crad) that it will send a confirmation to you. For 3D card, it has records your payment.

PS. Here we provide you the express companies website to check it.

Shipment Tracking

 
HK EMS: http://app1.hongkongpost.com/CGI/mt/enquiry.jsp

 For Hong Kong EMS tracking no. ending with HK. In Hong Kong, information relay is often slow and no systematic, if you tracking are not showing or not progressive, give it a couple of days and try again later... Emails with regards to tracking no. not track able will not be replied.
 
CN EMS: www.ems.com.cn/english-main.jsp

For EMS tracking no. ending with CN. In China, Information relay is often slow and no systematic, if you tracking are not showing or not progressive, give it a couple of days and try again later... Emails with regards to tracking no. not track able will not be replied.

FedEx: http://www.fedex.com/tw_english/

FedEx tracking no. - 10 nos.

TNT: www.tnt.com
TNT tracking nos.

DHL: www.dhl.com

DHL tracking nos.

Airmail: http://intmail.183.com.cn

Members Only, please pay attation:

You will probably face the problem that the components(screw, clasp) of watch you bought from us were broken or lost by yourself. How to solve the inconvenient problem? You have two selections to choose.

1. To pay US$40 (including shipping fee and commission) and we will deliver the components to you.

2. Buy new products of ours and we will resupply the components for free to you.

The following selections are only serve for the members of ours. If you are not our customer and also want to buy our components. Sorry! We don't supply the service.

PS.: If the size of straps of our watches that you bought was unsuited. Please get it to the watchshop to adjust to fit your wrist, thank you.